MovinCool PC7 - Manual (Page 9)

OPERATION AND INDICATORS OF REMOTE CONTROL (cont.)
Present Time Setting Procedure
When batteries are inserted,time is automatically set to 00:00. Set the present time as
follows.
Example:Set time to 10:30
Continuously press the HOUR button for
2 seconds .
The time indicator is blinking and can set the HOUR time.
Press the HOUR button. (Set to 10 :)
The time indicator is blinking and can set the MIN time.
If the remote control is at abnormal state, take out the batteries under the back cover
to clear off the display.
NOTE : The timer is set based on the present time.So set the present time correctly.
Continuously press the MIN button for 2
seconds .
Press the MIN button. (Set to 30)
Press the ON/OFF button to confirm the set time
or it automatically exits the time setting state after
15 seconds.