MovinCool PC7 - Manual (Page 10)

The operating ranges for cooling operation and dehumidifying are 63ºF-88ºF(17ºC-31ºC).
Dehumidifying and Cooling Operation
Power Source
WARNING
The AC outlet (115 VAC,Single Phase,60Hz) must be rated at 15A or higher.
The AC socket must be firm and reliable.
Do not connect the unit to a multiple socket outlet which is also being used for othe
r
electrical appliances.
Insert the AC power plug securely into the AC socket before using the unit, when it beeps
after 2 seconds, press ON/OFF button, the unit begins to operate.
Cooling Operation
1.Repeatedly press MODE button to choose the cooling mode, LCD window shows"COOL".
2.Repeatedly press TEMP+or TEMP-button to set a proper room temperature at 63ºF-88ºF
(17ºC-31ºC).
3. Press FAN SPEED button to choose a proper fan speed: high, medium, low speed.
4. Press SWING button to adjust the air delivery direction, the LCD window shows"
Note:
In order to improve the cooling efficiency of the unit:
a) Do not place the unit in direct sunlight.
b) Do not place the unit in near other heat source.
c) The set temperature can be set at 63ºF(17ºC) or higher, however the unit operates
intermittently at less than 70ºF (21ºC).
Dehumidifying Operation
1. Keep the windows and the doors closed to effectively dehumidify the room.
2. Repeatedly press MODE button to choose the dehumidifying mode, the LCD window
shows "DRY", and fan speed can not be adjusted.
USE OF CONTROL PANEL