Dell PowerEdge 4820 - Manual (Page 20)

18
Installation Guide
g Locate the top bolt holes in the right side of the rack, and fasten
the hinge body to the right side of the rack with the Allen bolts.
h Insert the spring between the top and bottom hinge-pin holes in
the bottom hinge body.
i Slide the hinge pin into the hinge body.
j Insert the retention clip through the hinge so that the retention clip
is below the spring.
4 Reverse the bottom hinge body.
a Remove the Allen bolts that secure the hinge body to the rack,
and place the bolts in a safe location.
b Rotate the hinge body 180 degrees so that the hinge posts are now on
the other side of the hinge body (see Figure 1-7).
c Locate the bottom bolt holes in the right side of the rack, and use
the Allen bolts to fasten the hinge body to the right side of the rack.
5 Rotate the front door 180 degrees so that its hinge-pin housings are on
the right side (see Figure 1-8).