Monster FlatScreen SuperThin Flat Mount - Up to 46” Screens - Manual (Page 7)

3
ENGLISH
Required Tools
Wall Stud Mounting:
Electronic stud sensor •
Level •
Electric hand drill •
3/16" drill bit •
Phillips screwdriver •
Combination wrenches or socket set •
Masonry Mounting
(brick, concrete, concrete blocks):
Above tools •
Replace 3/16" drill bit with 1/2" masonry drill bit •
Adapter Included for VESA
™
400x400 Pattern:
VESA is an international organization that
sets industry-wide standards for consumer
electronics. VESA information referred to in this
manual describes the patterns of holes in the
back of your TV and how they match to specific
Monster Flatscreen
™
mounts.
Four extension adapters are included to extend
the mount’s VESA compliant standard to 400x
400mm. If your TV’s VESA pattern requires this
adapter, refer to pages 16-17 for instructions.
3.9" (10cm)
2" (5cm)
3" (7.5cm)
1" (2.5cm)