Monster HTS 1900G User Manual
Page 30
22
ENGLISH
PRoGRaMMInG THe HT 300 Rf To
ConTRol MonsTeR GReenPoWeR
™
oUTleTs
(CONT)
syncing Rf signal between HT 300Rf and HTs 1900G
Hold sync switch
1 .
Unit will beep ONCE or TWICE after the 1 second ignore
•
Unit will beep THREE TIMES after 5 seconds
•
Release switch right after the sound is made, the unit will beep once every 0 .5 seconds to indicate that
2 .
it's in learning mode
Press "Program" switch on the HT 300RF
3 .
Both the HT 300RF and the HTS 1900G will beep TWICE, signaling that the HTS 1900G has learned RF code .
•
noTe: The HTS 1900G will stay in learning mode for 10 seconds . If no RF signal is received within 10 seconds,
learning mode will expire and you will need to press syncing switch again to restart learning mode . Please ensure that
the RF remote is 6 inches away from the main unit during syncing .