Monster Clarity HD Model One High Definition Multi-Media Speaker Monitor Gloss Finish - Manual (Page 22)

Problem What to do
My Clarity
HD
™
Model One
Monitors
suddenly
stopped
working and
the red LED
is flashing.
• Carefully check if the back plate of the amplifier is
hot. If the monitors have been running at their highest
power output for an extended period, the amplifier may
have overheated and the protection circuitry has
shut down the monitors temporarily. Your Clarity HD Model One
Monitors provide maximum protection from amplifier
overdrive, and overheating. Switch off the monitors
and wait 30 minutes to let the back plate cool down.
Switch the power back on.
• Raise the volume to check they are operating normally.
• If the monitors are still not responding, contact
the dealer you purchased them from, or Monster.
My iPod ® /
iPhone
®
does not
charge up.
• Make sure you have the power cord properly
connected on the back of the unit.
• Make sure you have the power cord plugged
into a working AC outlet.
• Remove your iPod/iPhone from the dock.
Wait 5 seconds. Then reseat your iPod/iPhone.
21