Monster iSport SuperSlim Wireless Bluetooth In Ear Sport Headphones - Manual (Page 7)

Basic operation
Charge the Battery
Your iSport® Wireless SuperSlim initially has
enough power to complete the pairing and a few
calls. When battery is low, you will hear warning
tone and indicator light changes to red. The
headphone includes a Micro USB cable that can
be connected to your computer or other device
made for USB charging. Plug the Micro USB end
of the included USB cable into the USB micro port
charger connector on the right channel side of the
headphone. Plug the other end into a USB port
on your computer or other devices made for USB
charging. The indicator light will be blue while
charging. Once fully charged, the indicator light
will be off. Charge time is approximately 1.5 hours
on an empty battery.
Note: The lifetime of the battery will be significantly
reduced if your headphone is left uncharged for a
long period. We recommend that you recharge your
headphone at least once a month.
Power On/ Power Off
Press the Multifunction button for about 1 second
to power on the headphone. To power off the
headphone, press the Multifunction button for
about 3 seconds.
Volume Control
Press the Volume “+” or “-” to turn volume up
or down, you hear beep once you reach the
maximum volume or minimum volume.
Pairing
Pair One Phone
1. Press and hold the Multifunction button for
about 5 seconds until indicator light flashes
blue and red alternately, you hear “Power
on” and “Pairing”. Now headphone is in
pairing mode.
2. Activate Bluetooth® on your phone and set it
to search for new devices.
3. Select “iSport Wireless Superslim”. If your phone
asks, enter 0000 (four zeros) for the passcode
or accept the connection. The indicator light
stops flashing red and blue once successfully
paired, you hear “Paired, phone 1 connected”.
Some phone list an option to “Play through
earphone”, select to use the headphone.
Note: When you unbox the headphone and power
it on for the first time, it will enter to pairing mode
automatically.
ENGLISH