Mogar Music 3DENHANCER - Manual (Page 2)

SAFETY INSTRUCTIONS
This symbol, wherever it appears,
alerts you to important operating and
maintenance instructions in the
accompanying literature. Read the
manual.
Detailed Safety and Operation Instructions:
All the operation instructions and safety should be read before the machine is operated.
Follow instructions:
All operation and user instructions should be followed by the user or the installer.
Retain Instructions:
The safety and operating instructions should be carefully retained for future reference.
Heed Warnings:
All warnings on the machine and in the operating instructions should be adhered to.
Water and Moisture:
The machine should not be used near water or in place full of moisture.
Ventilation:
The machine should be placed so that its location does not interfere with its proper ventilation. For
example, the appliance should not be situated on a bed, carpet, or similar surface that may create an
obstacle for the ventilation openings: or placed in a built-in installation, such as a bookcase or cabinet that
may impede the flow of air around the machine.
Heat:
The machine should be situated far away from heat sources such as heat registers, radiators, stoves, or
other machines (including amplifiers) that produce heat.
Power Source:
The machine should be connected to a power supply only of the type described in the operating
instructions or as marked on the external power transformer.
Power-Cord Protection:
Power supply cord should be routed so that it is not likely to be walked on or pinched by items placed
upon or against it, paying particular attention to cords, power transformer and plugs and the point where
they exit from the appliance.
Cleaning:
The machine should be cleaned only as recommended by the manufacturer.
Non-use Periods:
The external power transformer should be unplugged from the outlet when left unused for a medium or
long period of time.
Object and Liquid Entry:
Care should be taken so that objects do not fall and liquids are not spilled into the enclosure through
openings, do not leave bottles or cans upon the unit.
Damages that Require Service:
The unit should be serviced by qualified service personnel in the following cases:
1. The external power transformer, power supply cord or the plug has been damaged.
2. The enclosure of the unit has been damaged.
3. The unit has been exposed to water or moisture.
4. The unit does not appear to operate normally or exhibits a marked change in performance.
5. Objects have fallen, or liquid has been spilled into the unit.
Servicing:
The user should not attempt to service the unit beyond what is described in the Operating Instructions. All
other servicing should be referred to qualified and authorized service personnel.
2 – 3D ENHANCER USER’S MANUAL