MMD Equipment 100S-6B4 - Manual (Page 13)

1. Safety
1-10
Cleaning by air-blow
When cleaning dust accumulated in such devices as the
air-filter, by blowing compressed air, wear safety glasses, etc.
to protect your eyes.
M003
Lighting apparatus
It is recommended to use a lamp with safety guard fitted in low
light conditions.
Any lamps without safety guard are not recommended since
they can be broken and they could ignite flammables such as
fuel, etc.
TR0206
Taking off the radiator cap
Be sure to stop the machine and allow time to cool. Then
loosen the radiator cap one notch. After the coolant water is
sufficiently cooled and the inner pressure is released, take the
cap off.
If this procedure is neglected, the inner pressure can blow off
the cap. Steam jetting out of the radiator could result in
scalding. Follow this procedure under all circumstances.
H990432
Opening coolant water drain valve cap
Be sure to stop the engine, and let the coolant water
sufficiently cool down before draining it.
If the drain valve is opened before the coolant water is cooled
enough, hot water could jet out, and it could cause scalding.
H990432