Part names – MMD Equipment 185S-5C2 part 1 User Manual

Page 16

2.Part Names

2-2

No. Description

Function

1 Speed

regulator

For adjusting engine speed in the system.

2 Engine

For driving the compressor.

3 By-pass

valve

For keeping compressor oil at proper temperature.

4 Exhaust

muffler

Equipment

which

muffles an engine exhaust sound.

5 Radiator

For cooling the coolant for engine because it is water-cooled.

6 Oil

cooler

For cooling compressor oil circulating in the system.

7 Fuel

tank

For storing diesel fuel oil.

Engine oil level gauge

For checking engine oil level.(Right side of engine)

Coolant drain valve

For draining engine coolant.

10 Air-end

For compressing intake air.

11 Air filter(For compressor) For filtering the dust floating in the intake air.
12 Fuel

filter

For filtering diesel fuel oil.

Solenoid valve for AUTO

IDLE mode

For reduction of power under unloaded operation

14 Engine oil filter

For filtering engine oil

15 Air filter(For engine)

For filtering the dust floating in the intake air.

16 Pressure

control

valve

For keeping the receiver tank pressure higher than 58PSI in the tank.

17 Safety

valve

For releasing compressed air to the atmosphere when the pressure rises

higher than the rated pressure.

18 Engine oil filler port

For supplying and replenishing engine oil to engine.

19 Pressure

regulator

For regulating intake air volume.

20 Oil separator

For separating oil mist mixed in compressed air.

21 Separator receiver tank

For separating compressor oil from compressed air sent into the tank.

22 Compressor oil filler port

For supplying and replenishing compressor oil.

23 Compressor oil level gauge

For checking compressor oil level.

24 Compressor oil drain valve

For draining compressor oil from separator receiver tank.

25 Engine oil level gauge

For checking engine oil level.(Operation side)

26 Engine oil drain valve

For draining engine oil for replacement of it and for maintenance.

27 Fuel tank drain valve

For draining condensate and water accumulated at the bottom of

the fuel tank.

28 Radiator drain valve

For draining engine coolant at the bottom of radiator.

29 Oil cooler drain valve

For draining compressor oil at the bottom of oil cooler.

30 Battery

For electrically starting engine.

31 Sedimenter

For separating water mixed in fuel oil.

32 Reserve

tank

For feeding engine coolant.

33 Electromagnetic

pump

For air bleeding in fuel pipe system and also for fuel feeding to

engine.

34 Compressor oil filter

For filtering compressor oil circulating in the system.