MMD Equipment 150S-6A6 - Manual (Page 53)

5. Periodic Inspection/Maintenance
5-13
5.5.15 Change Air Filter Element
Every 1,000 hours
When an element that is clogged or has holes or cracks is used, dust or foreign material will get in the
engine. This causes accelerated wear in each sliding part of the engine. Be sure to make daily check
and cleaning so that the life of the engine will not be shortened
.
If the warning lamp for air filter clogging glows, remove
the element “1”and replace it after inspection.
(See 5.3)
In case you attach the cup“2”after element change, please
push into a case“3”firmly by hand, and fasten after
checking having applied the hook of the handle for cup
fixation to the case“3”.
5.5.16 Check Rubber hose
Every 1,000 hours
When any crack or wear is found on the hoses, change it even before the scheduled time.
Ask your nearest dealer for its replacement.
Be sure to properly clean air filter element
2
1
3
A050136