MK Products Python Rev.D - Manual (Page 12)

Python Owner's Manual - Page 5
Insulated Groove Drive Roll Kit.......................................................005-0643
For .045" (1.2mm) dia. aluminum wire. Includes insulated drive roll
P/N 511-0105 and idler roll assy. P/N 003-1870.
Insulated Groove Drive Roll Kit.......................................................005-0644
For .062" (1.6mm) dia. aluminum wire. Includes insulated drive roll
P/N 511-0106 and idler roll assy. P/N 003-1870.
Handle Kit..........................................................................................005-0699
Includes left and right handles, screws and drive roll door.
Trigger Kit..........................................................................................005-0694
Trigger adjustment kit includes a spring and sensitivity adjustment screw
replacement for all Python ® /CobraMAX™ torches.
Micro Switch Kit................................................................................005-0701
Replacement micro switch assembly for all Python ® /CobraMAX™ torches.
Potentiometer Kit..............................................................................005-0695
Replacement potentiometer assembly for all Python ® /CobraMAX™ torches.
Barrel Upgrade Kit............................................................................005-0696
Includes replacement barrel insulation.
Conduits
Flat spiral steel conduit Standard conduit
for steel & cored wire. with additional protective cover.
615-0208 ................15 ft./4.5m 001-0774 ................ 15 ft./4.5m
615-0216 ................25 ft./7.6m 001-0775 ................ 25 ft./7.6m
615-0218 ................50 ft./15.2m 001-0777 ................ 50 ft./15.2m
Snake Skins
Snake Skin protective covers are now standard on all torches. You may order
spare replacement covers to protect the lead assy of the torch when the
factory one becomes damaged or worn. It can easily be replaced in the field
by means of Velcro © .
Snake Skin Cover 13ft (for 15ft leads) ........................................931-0110
Snake Skin Cover 23ft (for 25ft leads) ....................................... 931-0122
Snake Skin Cover 48ft (for 50ft leads) ....................................... 931-0123
Heavy Duty Contact Tip - 3/8" Diameter
Part No. Wire Size Tip ID Arc Tip Length
621-0390 .030” (0.8mm) .040” (1.0mm) Spray 1-5/8” (41.3mm)
621-0396 .030” (0.8mm) .040” (1.0mm) Short 1-7/8” (47.6mm)
621-0391 .035” (0.9mm) .044” (1.1mm) Spray 1-5/8” (41.3mm)
621-0397 .035” (0.9mm) .044” (1.1mm) Short 1-7/8” (47.6mm)
621-0392 .045” (1.2mm) .053” (1.35mm) Spray 1-5/8” (41.3mm)
621-0398 .045” (1.2mm) .053” (1.35mm) Short 1-7/8” (47.6mm)
621-0393* .045” or .052” .060” (1.5mm) Spray 1-5/8” (41.3mm)
621-0399 .045” or .052” .060” (1.5mm) Short 1-7/8” (47.6mm)
621-0394 1/16” (1.6mm) .075” (1.9mm) Spray 1-5/8” (41.3mm)
621-0400 1/16” (1.6mm) .075” (1.9mm) Short 1-7/8” (47.6mm)
621-0395 1/16” (1.6mm) .085” (2.16mm) Spray 1-5/8” (41.3mm)
*standard - furnished with torch
Contact Tips
To remove contact tip when using full water cooled gas cup (P/N 621-0065),
contact tip removal tool (P/N 931-0002) must be used.