MK Products Cobra SX LE Com AC only - Manual (Page 13)

Cobra ® SX Lincoln Compatible ™ Owner's Manual - Page 5
Maintenance Tools
Tool Part Number
Drive Roll Removal Tool 931-0100
Recommended Spare Parts List
Qty.
P/N Description
1 615-0620-15 Conduit 15 ft
1 615-0620-25 Conduit 25 ft
1 615-0620-35 Conduit 35 ft
1 615-0620-50 Conduit 50 ft
1 005-0694 Trigger Assy Kit
1 003-2190 Potentiometer Assembly
1 005-0710 Handle Kit
1 003-2197 Micro Switch Assembly
2 511-0101 Drive Roll
2 511-0001 Idler Roll
MICRO SWITCH ASSY
003-2197
KNURLED DRIVE ROLL
511-0101
DRIVE ROLL REMOVAL TOOL
931-0100
IDLER ROLL
511-0001
(.030" - 3/64")
IDLER ROLL
511-0113
(.023")
Section D Maintenance
Periodic Maintenance
Your Cobramatic System is designed to provide years of reliable service.
Maintenance of the gun will normally consist of a general cleaning of the wire
guide system, including barrel, drive rolls, and conduit at regular intervals.
Remove spatter build-up from inside of nozzles with a hardwood stick. It is
recommended that the conduit be blown out every time you add a new spool
of wire.
The only parts on the Cobramatic system that are subject to normal wear are
the conduit, contact tips, gas cups, front body liners, wire guides, drive and
idler rolls. A supply of these parts should be maintained on hand.
The number of units in operation and the importance of minimal “down time”
will determine to what extent spare parts should be stocked on hand. See
the “Recommended spare parts list” for the most commonly replaced parts.
If repairs do become necessary, qualified shop maintenance personnel can
easily replace any part.