Message waiting, Responding to a lit msg led – Datel DKT2104-CT User Manual
Page 56
Features
Message Waiting
44
Strata DKT2004-CT Cordless Digital Telephone 10/02
Message Waiting
Use your
0VJ
LED/button and LCD to see/retrieve message(s).
An extension can receive up to four simultaneous Message Waiting indications and
LCD messages. One message is reserved for the Message Center.
Your phone can be programmed to have up to four additional (flexible) Message
Waiting buttons/LEDs. Ask and check mark if these buttons have been programmed
on your phone. If so, substitute them when the
0VJ
button/LED is mentioned in the
following steps.
Responding to a Lit Msg LED
1. Press
0VJ
, then lift the handset. Your phone rings the extension or voice mail
device that sent the indication. The LED continues to flash red.
2. After answering the message(s), place the handset back on-hook.
3. If the Msg LED continues to flash, you have more messages; repeat Steps 1~3
above to retrieve them. Voice mail devices turn off the LED/LCD indications after
a short delay, after you checked all messages.
4. To manually turn off your Msg LED, press your extension button, then press
. Do this step for each message received.
For Sales and Service call 508-580-2500
Tel: 508-580-2500
Datel Communications
Fax: 508-583-8412