Datel DKT2104-CT - Manual (Page 49)

Features
Call Waiting
Strata DKT2004-CT Cordless Digital Telephone 10/02
37
Call Waiting
Call Waiting places an incoming call in queue and alerts you with a warning tone. The
[DN] or Line LED flashes at the on-hold rate.
1. If you are talking, press +2/'
...or the flashing [DN]. The call you are on is placed on hold and you are connected
to the waiting call. The [DN] or
/LQH LED lights steady.
...or
/LQH
if your telephone has the Auto Hold feature. See your System
Administrator to find out if you have Auto Hold.
...or the ringing [DN] or /LQH .This disconnects the current call and then connects
you to the transferred call. The [DN] or /LQH LED remains steady.
...or WDON . The existing call is disconnected. The camped-on line rings your
telephone and the /LQH LED flashes at the incoming call rate.
2. Press a [DN], then /LQH
...or WDON again.
Direct Station Selection Buttons (Hotline)
This optional feature enables you to use a '66 button to connect directly to another
station’s line extension. The DSS LED shows the status (idle/busy) of the station and/
or the station’s primary extension. For example, a station’s DSS button LED shows
busy (light steady red) when the station is:
• busy on a call on any button
• idle but all appearances of the station’s extension are in use by other stations.
When the station is in DND, the LED flashes red.
➤
To connect directly to another station’s extension
1. When connected to a line or another station, press '66 .
The original party is put on-hold. You can call a station even if the DSS LED
shows busy (steady red).
2. Announce the call...or transfer the call by hanging up or pressing 5HOHDVH .
Note You can transfer the call to an idle or busy station.
For Sales and Service call 508-580-2500
Tel: 508-580-2500 Datel Communications Fax: 508-583-8412