Wiring, Intake modification, Suspension setup – Mini Tec 520000 MTD Kit User Manual
Page 19

19
o
1992-1995 Honda Civic EX/Si, Del Sol Si,
o
1992-1995 Honda Civic ESi (European Market)
Displacement : 1590 cm
3
Bore and Stroke : 75 mm X 90 mm
Compression : 9.4:1
Power : 125 hp @ 6500 rpm & 106 ft·lbf @ 5200 rpm
VTEC Switchover 4800 rpm
Fuel Control : OBD-1 MPFI
Head Code : P08
Wiring:
Because the Mini is a stand alone system, only OBD1 computers can be used. Pin-
outs can be found on the web. Contact your local Honda tuner for more information.
Intake Modification:
You will need to shorten or modify your intake so that it does not interfere with the
bulkhead. We suggest cutting the intake and adding 90 degree silicone elbows as
shown below. Silicone hoses can be purchased through various racing parts dealers
such a
Suspension Setup:
These figures are for daily driving. You may want to set up the car differently if
planning on racing your Mini.