Microsens Passive 8 Channel CWDM MUX Module - Manual (Page 3)

Passive CWDM Mux/Demux Module 8 Channel page 3/3
MICROSENS GmbH & Co. KG - Kueferstr. 16 - D-59067 Hamm / Germany - Tel. +49 (0)2381/9452-0 - Fax -100 - www.microsens.com
Technical Specifications
Type Passive Multiplexer/Demultiplexer Module for multiplexing
or demultiplexing of 8 CWDM channels. To be mounted in
the MICROSENS modular converter chassis.
Fiber type Single Mode 9/125 µm
SC/APC-connector (Line Interface)
SC/PC-connector (Channel Interface)
CWDM Channels According to ITU G.694.2, spacing 20 nm:
1470 nm, 1490 nm, 1510 nm, 1530 nm,
1550 nm, 1570 nm, 1590 nm, 1610 nm
Channel width min. +/- 6,5 nm
Channel Isolation min. 30 dB (adjacent)
min. 45 dB (non adjacent)
Insertion Loss max. 2,5 dB per channel
Return Loss min. 40 dB
Flatness max. 0,5 dB
Power supply 12 V DC / max. 100 mA via system backplane
(for management only)
Operating temperature 0°C to 55°C
Storage temperature -20°C to 80°C
rel. Humidity 5% to 80% non condensing
Dimensions 31 x 128 x 170 mm (w x h x d)
Notes
The passive Mux/DeMUX modules are belonging to a big range of converter modules and can be
combined with other modules of the same family. A power supply of the passive modules is not
necessary.
Ordering information
Art.-No. Description Connectors
MS416410M
8 channel CWDM MUX and DeMUX
module (for an 8 channel
MUX/DeMUX system there are two
modules necessary)
Local: 8x SC/PC simplex
Line:1x SC/APC simplex
MICROSENS reserves the right to make any changes without further notice to any product to improve reliability, function or design. MICROSENS does not assume
any liability arising out of the application or use of any product. 3103he