Install complete, After installation complete – MicroLinks PRO10 - install manual User Manual

Page 14

Microscope Installation Manual http://www.ViTiny.com

3.1.4

Install Complete

Click “finish” to complete Install program. See Fig 3-6. Click “finish” to end installation

program.

Fig. 3-6 Driver installations complete

3.1.5

After installation complete

After installation is completed, click Start -> all programs will also find driver device file

shown Fig.3-7.

Fig.3-7 the location of device in all programs position.

MICROSCOPE can be executed from ICON AMCap as below Fig. 3-7. However,

AMCap is a simple tool for preview only and can’t support image process as the

MICROSCOPE AP.