Metz Mecablitz 44 MZ-2 - Manual (Page 70)

ķ
70
SCA 3002-Adapter
SCA 300-Adapter
SCA 301
TTL flash mode
•• •• x•
••
•
••
•
••
•
••
• • • • • • •
Automatic TTL fill-in flash Manual TTL flash exposure correction Auto flash mode Man. flash exposure corr
. in the auto flash mode
Manual flash mode Man. flash mode with par
t. light output levels
Slave mode in Metz cordless remote system Automatic motor zoom control of the reflector Extended-zoom mode of the reflector Automatic aper
ture setting
Automatic ISO setting Autom. adaptation of the max. flash range indication
•
•• •• •• x•
••
• • • • • •
x•
AF measuring beam control Flash-ready indication in camera viewfinder Corr
. expos. confir
mation in camera viewfinder
Automatic flash sync speed control 1st or 2nd cur
tain synchronisation (REAR)
Automatic switch-of
f function of the mecablitz
W
ake-up function
Triggering control (Minolta, Pentax) Spot beam mode (Pentax) Contrast control (Pentax) Preflash for red-eye reduction (Nikon) Matrix controlled TTL fill-in flash (N
ikon)
Flash functions
SCA adapter
• = Flash function is supported by the mecablitz.
x = Flash function in only supported by the mecablitz if this function is set on the camera.
∆ = Only with Minolta digital cameras Dimage 5, 7, 7i
Table 1: Overview of the flash functions
∆
Minolta ADI flash control
2. Overview of the flash functions
Various flash functions are available when the mecablitz 44 MZ-2 is operated
with an SCA adapter of the SCA 3002 or SCA 300 system or the standard
foot 301. The availability of the individual flash functions, however, depends
on the given camera system (camera manufacturer), the specific camera type
and the SCA adapter. For more detailed information please refer to the SCA
Table and the operating instructions for the individual SCA adapters.