beautypg.com

Setting the clock manually, Technical specifications ua32s – Meinberg UA32S User Manual

Page 17

background image

17

Technical Specifications UA32S

RECEIVER:

Synchronous demodulator with automatic gain control
bandwidth: approx. 50Hz

ANTENNA:

Active external ferrite antenna in a plastic case
Length of the cable: up to more than 100m

Standard version:
SMB type connector, 5m of RG174 cable

Outdoor version:
N type connector, RG58 cable, adapter RG58/RG174

RF AMPLITUDE,
MODULATION:

Indicated by LED

DISPLAY:

with 20HP front panel:7-Segment display (10mm LED segments)
Also available in a 4HP version (no display)

TIMECODE
CHECK:

Parity and consistency checking over a period of two minutes
RF distortions indicated by both LED and a status character in the
serial output string
Without RF signal the clock runs on XTAL
with an accuracy of 10

-5

BATTERY
BACKUP:

Gold Cap or Lithium battery
when the power is turned off, the on-board RTC keeps the time
based on XTAL for more than 150 hours (gold cap) rsp. more
than 10 years (lithium battery)

RELIABILITY OF
OPERATION:

Microprocessor supervisory circuit provides watchdog timer,
power supply monitoring and backup-battery switchover

MANUAL SETTING
OF TIME AND
DATE:

Two optional push buttons provide manual setting of time and
date.