Meinberg DCF77 UA509 - Manual (Page 15)

15
TRANSMISSION
SPEED:
configurable by DIL switches
600 to 57600 baud
FRAMING: configurable by DIL switches
1 start bit / 7 data bits / 1 even parity bit / 2 stop bits (7E2)
1 start bit / 8 data bits / no parity bit / one stop bit (8N1)
OUTPUT MODE : configurable by DIL switches
once per second, once per minute, only on request (" ? ")
TIME ZONE: configurable by DIL switches
MEZ/MESZ=CET/CEST, MEZ=CET, UTC
OUTPUT STRING: refer to: "Format of the Meinberg Standard Time String"
CONNECTORS: 64 pin rear VG edge connector DIN 41612
Subminiature coaxial RF connector (SMB type)
ANTENNA: active external ferrite antenna in a plastic case
Length of the cable: up to 100m without amplifier
POWER
REQUIREMENTS: +5V, @250mA
-15V only when using the aktive 20mA current loop port
PHYSICAL
DIMENSIONS:
Eurocard, 100mm x 160mm, 1.5mm Epoxy
AMBIENT
TEMPERATURE: 0 ... 50°C
HUMIDITY: max. 85 %
OPTIONS: Hardware and software modifications accordding to customer
specification
CE Label
This device conforms to the directive 89/336/EWG on the
approximation of the laws of the Member States of the European
Community relating to electromagnetc compatibility.