Meinberg DU35S - Manual (Page 7)

7
The Menus in Detail
Time
When pressing SET in this menu the actual valid time of the DU35S appears in the
display with a blinking digit of the hours. Pressing and keeping pushed the SET button
for at leasr half a second before releasing lets the blinking digit increment by one. This
can be repeated until the value has reached the target. One more brief pressure of SET
lets the next digit begin to blink that can be incremented in the same way. Pressing
MENU acknowledges the modification and changes over to the next menu.
Date
The date can be modified in the same manner that is described above.
Language
When pressing SET in this menu the actual valid language of the DU35S' menu texts
appears in the display. Renewed pressing SET causes another language appearing.
When the wanted (and available) language is displayed, the menu is to leave by
pressing MENU.
Mode
DU35S is able to show the time and/or date in different formats. One of these different
display modes can be selected in this menu by pressing SET. Press the MENU button
to acknowledge and to leave this menu.
Brightness
The brightness of the display can be set in three steps. Press SET in this menu to
increment an integer between 1 and 3 where 1 means the most dimmed step and 3
means the fully brightness. Press MENU to acknowledge and to leave this menu.
Serial
Baudrate and framing of the serial interface can be set using this menu. Available
baudrates are: 2400, 4800, 9600 and 19200. The framing can be choosen between 7E2
and 8N1. Setting this parameters occurs similar to the procedures described before. A
short brief push to the SET button changes to the next parameter to be set, a longer
push of SET lets the blinking value increment by one. Press MENU to acknowledge
and to leave this menu.