MEGAPOWER ML131 - Manual (Page 3)

3
1. The appliance inlet of the power supply is the disconnector from mains and must be anytime
easily accessible.
2. The maximum noise level of the product is L
PA
 70dB (A) DIN 45635-19-01-KL2.
1.
Der Gerätestecker des Netzteilesbildet die TrennvorrichtungzumVersorgungsstromkreis und
mußjederzeitleichtzugänglichsein.
2. Max. Geräuschpegel: L
PA
 70dB (A) DIN 45635-19-01-KL2.
FCC Information
This equipment generates and uses radio-frequency energy and, if not installed and used in
accordance with the instruction manual, may cause interference to radio and television reception.
It has been tested and found to comply with the limits for a class A computing device in
accordance with the specifications in Subpart J of Part 15 of FCC Rules, which are designed to
provide reasonable protection against such interference when operated in a commercial
environment. If this equipment does cause interference to radio or television reception, the user
may try to correct the interference by one or more of the following measures:
1.
Re-orient the receiving antenna for the radio or television.
2. Relocate the equipment with respect to the receiver.
3. Plug the equipment into a different outlet so the equipment and receiver are on different
branch circuits.
4. Fasten cables to ensure adequate electromagnetic interference controls.
Acknowledgments
The followings are registered trademark or trademarks of their respective corporations: Google,TI,
Microsoft etc.
Safety Information
Please read these instructions before using your Pico Projector. Failure to comply with these instructions
could result in electric shock, fire, personal injury or damage to your Pico Projector.
Power Source
Check the power specification plate on the back of the Pico Projector. Ensure that your line voltage
matches with the power adapter rating of the Pico Projector.The Power Adaptor accepts AC power
90-264V, 50-60 Hz.
Power Adaptor
Use only the power adaptor supplied with the Pico Projector. Do not use the power adaptor if it has
become damaged or frayed. For a replacement power adaptor, contact your authorized dealer.