MEGAPOWER ML131 - Manual (Page 21)

21
This illustration shows the connector panel at the rear of your DLP Pico Projector. Refer to this figure
when making wired connections to the DLP Pico Projector.
HDMI IN
:
1. Connect Pico projector to HDMI source with a HDMI cable.
2. Start the Video Input application and the Pico projector automatically
detects and displays the source image (Note : HDMI connection from
computer may not always have sound as it depends on the capabilities of the
computer sound card).
VGA IN
1. Connect Pico projector to VGA source with the supplied custom VGA cable.
2. Start the Video Input application and the Pico projector automatically
detects and displays the source image.
AV IN
1. Connect the Pico projector to AV source with the supplied custom AV cable.
2. Start the Video Input application and the Pico projector automatically
detects and displays the source image.
USB A