Denon AVR-890 - Manual (Page 42)

Get
ting Star
ted
Connections
Pla
ybac
k
Remot
e Contr
ol
Inf
or
mation
Tr
oubleshooting
Specifications
ENGLISH
Multi-Zone
Setting items Setting contents
Antenna Aiming
Check the SIRIUS radio
reception sensitivity.
This can be set when the source is set to SIRIUS .
Satellite : Indicate satellite signal strength.
Terrestrial : Indicate terrestrial signal strength.
SIRIUS Antenna
Display Condition
Signal strength is excellent
Signal strength is good
Signal strength is weak
No signal
Check the SIRIUS Radio Reception Sensitivity
(Antenna Aiming)
Default settings are underlined.
Setting Radio Reception Restrictions (Parental Lock)
Default settings are underlined.
Making the input settings (Input Setup)
: Moves the cursor (Up/Down/Left/Right) : Decision the setting : Return to previous menu
Remote control
operation buttons
:
Displaying the menu
Cancel the menu
Settings
Setting items Setting contents
Lock Setting
Set the channel radio
reception limits.
This can be set when the source is set to SIRIUS .
1. Press
.
2. Using uio p , input the password (4 digits number) and press .
3. Select channel by pressing ui , and set the lock by pressing o p .
• Unlock : Do not lock selected channel(s).
• Lock : Lock selected channel(s).
b
When a Parental Locked channel is tuned, “Code : [ ]” is displayed,
then input the password.
The default password is “0000”.
If the password is wrong, “Incorrect Code” is displayed. Input the correct
password.
While listening to the channel being played, you can also set parental lock
(vpage 43). •
•
•
Edit Lock Code
Change the password.
This can be set when the source is set to SIRIUS .
1. Press
.
2. Input “Current Lock Code” (4 digits) using uio p , and press .
3. Input “New Lock Code” (4 digits) using uio p , and press .
4. Input “Repeat New Lock Code” (4 digits) again using uio p , and
press .
5. Press ui to select “Execute”, and then press .
If the correct password is input, “Completed” is displayed, and the new
password is modified.
If the “Current Code” is incorrectly input, “Incorrect Code” is displayed,
and proceed again from step 1.
If the password input is 3 digits or less, “Enter 4-digit” is displayed, and
input again with a 4 digit password.
If the new password is not correctly input, “Code don’t Match” is displayed
and the password does not change.
The password cannot be cleared even if the operation to reset the unit is
performed. We recommend writing down the password so as not to forget
it. •
•
•
•