Denon AVR-890 - Manual (Page 35)

2
Get
ting Star
ted
Connections
Pla
ybac
k
Remot
e Contr
ol
Inf
or
mation
Tr
oubleshooting
Specifi
cations
ENGLISH
Multi-Zone
Making detailed settings (Manual Setup)
Setting items Setting contents
Volume Control
Set the MAIN ZONE volume
setting. Volume Display : Set the volume display method.
Relative : The volume is displayed within the range of – – –dB (Minimum),
–80.5 dB ~ +18 dB.
Absolute : The volume is displayed within the range of 0, 1 ~ 99. •
•
Vol.Limit : Make a setting for maximum volume.
OFF : Do not set a maximum volume.
–20dB(61) / –10dB(71) / 0dB(81) •
•
Power On Level : This sets the volume set when the MAIN ZONE’s power
is turned on.
Last : Use the memorized setting from the last session.
– – – : Always use the muting on condition when power is turned on.
–80dB(1) ~ +18dB(99) : The volume is adjusted to the set level. •
•
•
Mute Level : This sets the amount of attenuation of the volume when the
mute mode is set in the MAIN ZONE.
Full : The sound is cut off entirely.
–40dB : The sound is attenuated by 40 dB.
–20dB : The sound is attenuated by 20 dB. •
•
•
Source Delete
Remove
input sources
that are not used from the
display.
TUNER / PHONO / CD / DVD / HDP / TV / SAT/CBL / VCR / DVR /
V.AUX / SIRIUS : Select the sources you do not want to use.
ON : Use this source.
Delete : Do not use this source.
NOTE
• The currently selected input source cannot be set.
• Input sources set to “Delete” cannot be selected using
.
•
•
GUI
Make the settings related to
displays on the TV screen. Screensaver : Make screensaver settings.
ON : The screen switches to the screensaver if no operation is performed
for approximately 3 minutes while a menu is displayed or while an iPod
screen is displayed. When you press
uio p , the screen saver is
cancelled and the screen before that screen saver started is displayed.
OFF : Turn the screensaver function off.
•
•
Wall Paper : Set wallpaper to display the background when playback is
stopped, etc.
Picture : Set the background to a picture (DENON logo).
Black : Set the background to black. •
•
Making other settings (Option Setup)
Default settings are underlined.
See overleaf
: Moves the cursor (Up/Down/Left/Right) : Decision the setting : Return to previous menu
Remote control
operation buttons
:
Displaying the menu
Cancel the menu
Setting items Setting contents
GUI
Make the settings related to
displays on the TV screen. Format : Set the video signal format to be output for the TV you are
using.
NTSC : Select NTSC output.
PAL : Select PAL output.
The “Format” can also be set by the following procedure. However,
the GUI screen is not displayed.
1. Press and hold
o on the main unit and for at least 3 seconds.
“Video Format” appears on the display.
2. Press
o p and set the video signal format.
3. Press , or to complete the setting.
NOTE
When a format other than the video format of the connected TV is set, the
picture will not be displayed properly.
•
•
Text : The mode name is displayed when the operation for switching the
surround mode, input mode, etc., is performed.
ON : Turn display on.
OFF : Turn display off. •
•
Master Volume
: Master volume display during adjustment.
Bottom : Displayed at the bottom of the screen.
Top : Displayed at the top of the screen.
OFF : Turn display off. •
•
•
Tuner Information
: This sets the time the GUI menu is displayed when a
tuner operation is performed.
Always : Show display continuously.
30sec : Show display for 30 seconds after operation.
10sec : Show display for 10 seconds after operation.
OFF : Turn display off. •
•
•
•
iPod Information
: This sets the time the GUI menu is displayed when an
iPod operation is performed.
Always : Show display continuously.
30sec : Show display for 30 seconds after operation.
10sec : Show display for 10 seconds after operation.
OFF : Turn display off. •
•
•
•
Set
tings