MBM Corporation TRIUMPH 6655 - Manual (Page 22)

- 22 -
IDEAL 4855 • IDEAL 5255 • IDEAL 6655
T
• Operation •
Eject function
If EJECT N is pressed instead of START M ,
after inserting the measurement L , the
backgauge will advance forwards so that
paper can be removed. Finally the backgauge
moves to the last setting.
Multiple cut
• Enter the start dimension on the display L
• Advance to the measurement with the
START M
• Push the paper to the backgauge G
• Press multiple cut O
• Multiple cut sign appears top left together
with the value 00.00 P
• Enter multiple cut measurement (appears in
red letters)
• Press START the backgauge advances
by the multiple cut size
• This is repeated everytime a cut is
activated.
Exiting program-mode
• Press multiple cut O (yellow).
Multiple cut sign and value are deleted.