MBM Corporation TRIUMPH 6660 - Manual (Page 34)

- 34 -
IDEAL 4860 • IDEAL 5260 • IDEAL 6660
A
3.
1.
2.
2.
A
1.
Lower the blade by pressing both cutting
buttons (1.). Keep one button pressed and
turn off the main switch (2.).
With the special wrench (A) the 3 eccentrics
should be screwed down (3.)until the paper is
cut along the entire length of the blade
(The blade must remain parallel, not too deep
into cutting stick).
• Blade and cutting stick replacement •
Only IDEAL 4860
Tighten the blade screws (A) on the right hand
side.
Turn main switch to position "I" (1.). Blade will
return to upper position. Tighten the blade
screws (2.) firmly.