MBM Corporation TRIUMPH 6660 - Manual (Page 15)

- 15 -
STOP
D
C
• Operation •
It is forbidden to operate the machine if the
operating and safety instructions have not
been understood. Please check the safety
devices are functioning and complete before
use.
• All covers have to be mounted (A).
• Safety beam guard must be mounted (B).
• The release for cutting is allowed only if the
two-hand safety device is operated at the
same time (C)
• Safety light beam:
The machine stops immediately if anyone
reaches into the cutting area (D).
We recommend you keep a record of your test
results.