MBM Corporation TRIUMPH 721-06 LT - Manual (Page 36)

- 36 -
IDEAL 7228-06 LT
A
D
E
C
D
B
C
F
max
min
Safety test
The safety regulations are according to the
regulations of the country where the cutting
machine is operated. The manufacturer
recommends a safety check is made every 5
years by an authorised service team.
• Maintenance and cleaning •
Grease the remaining parts twice a year (see
picture).
The main switch must be on "0" (B).
Disconnect from the mains.
Remove the front upper housing (E) taking
care of the cable.
Remove lower panel and rear wooden panel
(C). Tools in tool set.
• Check oil (F). If oil is below minimum contact
your dealer.
• Remove any paper.
• Grease the machine.
• Check the 4 joining bolts and 2 pushing bars
for wear (D). If necessary inform your service
personnel.
• Mount the machine.
Maintenance work must be carried out on the
machine every 5 hours.