MBM Corporation TRIUMPH 721-06 LT - Manual (Page 26)

- 26 -
IDEAL 7228-06 LT
If the cutting quality decreases:
• Check the cutting depth (see page 34).
• Check the cutting stick (see page 30).
• Replace or grind the blade (see page
26 - 34).
The blade cannot be ground if the blade
height is less than 83 mm/3,29 inches.
A new blade must be used.
The blade may only be ground by a qualified
supplier or from the manufacturer
Krug & Priester, D-72336 Balingen.
Danger! Risk of injury!
The blade is extremely sharp. Do not
extract the blade or transport it without the
changing tool. Changing the blade may only
be performed by trained staff.
• Blade and cutting stick replacement •