MBM Corporation BINDERYMATE 2 - Manual (Page 11)

9
Lubricate the following points before each spool of
wire using SAE 20 oil.
L. One drop in top hole of head operating link.
Access through slot at top of cover behind stitcher
head.
M. One drop in lower/side hole of head operating
link. Access through round hole (while viewing
through slot immediately above round hole) in
side of cover.
N. One drop on clincher slide.
EXTERNAL LUBRICATION:
(FIGURES 8, 9, 10)
L
M
Figure 8
(CA44 Layout 2)
Figure 9
(QF27F4)
L
M
Figure 10
(QF27F5)
N