MBM Corporation AEROCUT G2 User Manual
Page 26
２５
③ Select the cutting pattern.
④ Cutting pattern content confirmation and partial correction
Press A through N to make corrections. O, P and Q are automatic calculations. It is
possible to enter in inches up to the 3rd decimal place.
Cutting pattern switching
Return to Paper
Selection Screen
Confirm cutting pattern and
move to Operation Screen
Move to Cutting Pattern
Confirmation Screen
Cutting Pattern
Selection Screen
Feed direction
The maximum paper weight for the
perforator is 65 lbs (Cover stock) [176 g/
㎡]. It is not to be used in combination with
the creaser.
Creasing can be performed up to six
times per piece. It is not to be used in
combination with the perforator
.
See also other documents in the category MBM Corporation Equipment:
- TRIUMPH 4860 (48 pages)
- TRIUMPH 5260 (36 pages)
- IDEAL 4002 (11 pages)
- IDEAL 2404 (56 pages)
- IDEAL 0101 HDP (20 pages)
- IDEAL 0201 OMD (40 pages)
- IDEAL 2403 (28 pages)
- IDEAL 3105 SMC (44 pages)
- IDEAL 2502 (11 pages)
- IDEAL 4109 CC (18 pages)
- IDEAL 4006 (12 pages)
- IDEAL 2600 (10 pages)
- IDEAL 8220 (8 pages)
- IDEAL 2501 (24 pages)
- AL1 (1 page)
- QuickJog paper jogger (1 page)
- Paper Drill 200 single spindle (14 pages)
- MBM 25 (8 pages)
- Maxxum 91 corner stapler (12 pages)
- LJ 3000 (2 pages)
- LEOWORK PAPER LIFT (12 pages)
- HIGH CAPACITY STACKER (16 pages)
- FMM3 (24 pages)
- ES 8000 (32 pages)
- ES 5500 (20 pages)
- ES 5000 (16 pages)
- IM 8100 (13 pages)
- CORNER STAPLER (20 pages)
- ES 2000 (14 pages)
- ES 3000 (20 pages)
- AJ 700 (13 pages)
- AEROCUT NANO (30 pages)
- BC 12 (38 pages)
- FC 10 TWIN TOWER SYSTEM (12 pages)
- AEROCUT (42 pages)
- DocuVac (27 pages)
- DocuVac Installation (6 pages)
- 49 (26 pages)
- 46 (17 pages)
- 46 Installation (13 pages)
- 49 Installation (4 pages)
- OMR (5 pages)
- 45 (29 pages)
- Spine Pro Bookletmaker (16 pages)