DXG Technology DXG-328 - Manual (Page 21)

19
6-1 Setup Mode
In Setup Mode, you can adjust settings, including
Image Size, Image Quality, White balance, and EV
Compensation; format and factory default setting.
Setup language, date/time, and light frequency as
follows:
1. Turn the camera on.
2. Press Mode Button
for two seconds and
use the Function keys to move to .
3. Press the Button to get into Setup Mode
screen, the LCD monitor will display the menu.
4. Use the “” of the UP/DOWN Function keys to
move between selections; use “” to toggle between
submenus (Image Options, Option and System
Options).
5. Then use the Button to enter the menu.
Make your selections with “” and ””.
6. Last, use the Button to confirm selections.
6-2 Record Mode
Record Mode offers you a quick and easy way to take
ideal pictures.
1. Turn on the camera to go directly into Record Mode.
You can also enter into Record Mode through Mode
Button and use the Function key to
move to , and select .
Upon entering, images will appear on the LCD
monitor.
2. Press and hold the Shutter button half way down.
Yellow brackets“[ ]" will appear in the center of
the LCD monitor for the automatic exposure. Fully
depress the Shutter button and release it to
complete the recording.
3. You can use to select two flash modes when
using the camera: Auto, and Off.
4. Press the Mode Button to toggle
the LCD Monitor displays. There are five display
modes: Standard Display, Full Display, Image
Only, LCD Monitor Off, and Only Operation Settings.
5. Use the Mode Button to set the details for
recording images; e.g., Image Resolution, Image
Quality, Self-timer, and Light Frequency settings. The
menu will appear on the LCD monitor when the Mode
Button
is pressed. Use “” of the
Function key to move between selections.
6. Use “” and ”” of the Function key to adjust
the digital zoom. The adjustment ratio of the digital
zoom will appear on the left hand side of the LCD
monitor, from 1.0 time to 4.0 times, with 0.5 times
increase at each adjustment.
7. The green LED is on when the Macro key on the left
6. Getting Started