DXG Technology DXG-328 User Manual
Page 10
8
3-3 Power Supply
●
Depress the power button until a long beep
sounds. Power is on.
●
Depress the power button sound until a long beep
sounds. Power is off.
●
Depress the power button to turn on the camera.
After the camera is on, the red LED will blink, and
then the last image recorded will appear on the LCD
monitor.
※
If no operations are performed for 60 seconds, the
power is turned off to prevent battery drain. Please
power on the camera again to resume shooting.
※
The following features are automatically saved in the
configuration before the camera is turned off unless
"Reset Default" has been selected to restore its
factory settings.
1. Resolution 2. Image Quality 3. Language
4. White balance 5. EV value 6. Frequency
7. PC MODE
3-4 Shutter Button
This camera is designed for 2-step shutter function. A
set of yellow brackets "[ ]" will appear in the center of
the LCD monitor when the Shutter button is pressed
and held half way down. The camera will beep after the
Shutter button is depressed fully to indicate the shot is
being taken.