Matters for special note, Hen not in use, Preparations before use – MBM Corporation HIGH CAPACITY STACKER User Manual

Page 7: Ssembly and installation of stacker

3. Matters for special note

3.1 When not in use

・Be sure to remove the power plug from the outlet.

4. Preparations before use

4.1 Assembly and installation of stacker

(1) Assembly

Insert the paper butt unit in the square hole on the stacking

slide cover, and insert the gray connector into the plug of
the stacking slide cover.

(2) Installation

Set the stacker on the collator table at a position about 55

mm from its left edge.

(As for the exact position, fine adjustment should be made

when the forceful ejector is installed.)

- 6 -