Drolet DH04200 - Manual (Page 9)

OPERATION INSTRUCTIONS
COMBUSTIBLE
• Your stove has been designed to work with oil #1 or #2. DO NOT USE GASOLINE, CRANKCASE
OIL OR ANY OIL CONTAINING GASOLINE. The manufacturer declines all responsibility regarding
damage cause by using other combustibles.
•
Make sure to use oil without impurities which may plug filters and valve’s orifice. Impurities only
give an improper combustion.
LIGHTING
BEFORE LIGHTING
• make sure that :
The tank is full;
The isolating valve is open;
• See that the (3) rings are in the right
position. Each of them are stamped A, B
and C (figure 13).
• Make sure that the flow regulating handle is
in the « 0 » position (figure 14b).
• If it’s not already done, arm down the valve’s
lever located behind the stove (figure 14A).
• Wait for the valve to fill up and let the level
stabilize.
• BEFORE ATTEMPTING TO LIGHT YOUR
STOVE, MAKE SURE THAT THE FLOW
REGULATING HANDLE IS IN THE 0
POSITION.
Figure 14B: CONSTANT LEVEL FLOW
CONTROL VALVE (CARBURATOR)
Figure 13: RINGS POSITION
Figure 14B: ARMING / DEARMING FLOW
CONTROL VALVE (CARBURATOR).
Page 8 of 15