Directed Electronics Avital 2300 User Manual
Page 17
13
©
2001 Directed Electronics, Inc.
was triggered in your absence. If you hear five chirps when you
disarm, this indicates that a specific zone was triggered so many
times that the NPC
™
has bypassed that zone. In both cases, the
pattern of the flashing status LED indicates which zone was trig-
gered (see Table of Zones). The LED does not, however, report when
warn away responses have activated; it only reports triggered
sequences. The system retains this information in its memory and
will continue to chirp four or five times each time the system is
disarmed, until the next time the ignition is turned on.
A zone is represented by the number of LED flashes used by the
system to identify a particular type of input. Standard input assign-
ments are listed in the following table, along with spaces to write
in any optional sensors or switches that you have had installed.
ZONE
(Number of
DEALER-INSTALLED
LED Flashes)
DESCRIPTION
OPTIONS
1
Instant trigger for optional
hood or trunk pins
2
A heavier impact detected by
the on-board shock sensor
3
Door switch trigger
5
Ignition trigger
NOTE: The LED does not report when the warn away response has been
activated; it only reports triggered sequences.
Table of Zones