Maytag MER8850DS - Manual (Page 5)

5
CONVECT
BAKE Convection
cooking 1. Press CONVECT BAKE.
2. Press the number keypads to set a temperature other than 350°F (177°C) in 5° increments
between 170°F and 500°F (77°C and 260°C).
3. Press START. Auto conversion will reduce the temperature by 25°F (15°C).
4. To change the temperature, repeat steps 1 and 2. Press START for the change to take effect.
5. Press CANCEL when finished.
CONVECT
ROAST Convection
cooking 1. Press CONVECT ROAST.
2. Press the number keypads to set a temperature other than 325°F (163°C) in 5° increments
between 170°F and 500°F (77°C and 260°C).
3. Press START. Auto conversion will reduce the temperature by 25°F (15°C).
4. To change the temperature, repeat steps 1 and 2. Press START for the change to take effect.
5. Press CANCEL when finished.
CONVECT
BROIL Convection
cooking 1. Press CONVECT BROIL.
2. Press the number keypads to set a temperature other than 350°F (177°C) in 5° increments
between 170°F and 500°F (77°C and 260°C).
3. Press START. Auto conversion will reduce the temperature by 25°F (15°C).
4. To change the temperature, repeat steps 1 and 2. Press START for the change to take effect.
5. Press CANCEL when finished.
KEEP WARM Hold warm Food must be at serving temperature before placing it in the warmed oven.
1. Press KEEP WARM.
2. Set temperature between 145°F (63°C) and 190°F (88°C) using the number keypads. The
default temperature is 170°F (75°C).
3. Press START.
4. Press CANCEL when finished.
DELAY START Delayed start The DELAY START keypad is used to enter the starting time for an oven function with a delayed
start.
COOK TIME Timed cooking Timed Cooking allows the oven to be set to turn on at a certain time of day, cook for a set length
of time, and/or shut off automatically. Delay start should not be used for foods such as breads
and cakes because they may not bake properly.
To set a Timed Cook or a Delayed Timed Cook, see “Cook Time” section.
POWER
PREHEAT Rapid oven
preheating Provides the fastest preheat time for the BAKE function.
1. Press POWER PREHEAT.
2. Press the number keypads in response to the scrolling text to enter the Bake temperature.
3. Press START.
4. A reminder tone will sound when the preheat temperature is reached. Place food inside the
oven.
NOTE: This feature should be used only for one-rack baking. Unused racks should be removed
prior to Power Preheat. A standard flat rack should be used for Power Preheat.
If preheating for the Bake cycle has already started, Power Preheat may be started directly by
pressing Power Preheat.
WARMING
CENTER
ON/OFF
Warming zone Press WARMING CENTER ON to select the warming element on the cooktop, then press START.
Press WARMING CENTER OFF to turn off the warming element.
WARMING
DRAWER
ON/OFF
Warming drawer
(on some models) 1. Press WARMING DRAWER to select the Warming Drawer function.
2. Press START to begin preheating the warming drawer.
3. Press WARMING DRAWER to turn off the heating element.
See the “Warming Drawer” section for more information.
CLEAN Clean cycle See the “Clean Cycle” section.
CONTROL
LOCK
hold 3 sec. to
lock Oven control
lockout No keypads will function with the controls locked.
1. Check that the oven and the Kitchen Timer are off.
2. Press and hold CONTROL LOCK keypad for 3 seconds.
3. If enabled, a tone will sound, and “CONTROL LOCKED” will be displayed.
4. Repeat to unlock.
SETTINGS Oven use
functions Enables you to personalize the audible tones and oven operation to suit your needs. See the
“Oven Use” section.
KEYPAD FEATURE INSTRUCTIONS