beautypg.com

Warning, Install air filter – Maytag MSB26C6MDM User Manual

Page 11

background image

11

NOTE:

Tighten the nut by hand. Then tighten it with a wrench

two more turns. Do not overtighten.

4.

Turn shutoff valve ON.

5.

Check for leaks. Tighten any nuts or connections (including

connections at the valve) that leak.

Complete the Installation

1.

Plug into a grounded 3 prong outlet.

2.

Flush the water system. See “Water and Ice Dispensers” in

the User Instructions or User Guide.

NOTE:

Allow 24 hours to produce the first batch of ice. Allow

72 hours to completely fill ice container.

Install Air Filter

(on some models)

On some models, your refrigerator's accessory packet includes

an air filter, which must be installed prior to use. On some

models, the air filter is already installed at the factory.

The air filter reduces the buildup of odors. This helps to maintain

a cleaner environment inside the refrigerator.

Installing the Air Filter (on some models)

The filter should be installed behind the vented door, which is

located (depending on your model) along either the rear or left

interior wall near the top of the refrigerator compartment.

1.

Remove the air filter from its packaging.

2.

Lift open the vented door.

3.

Snap the filter into place.

4.

Close the vented door.

Installing the Filter Status Indicator (on some models)

The filter comes with a status indicator, which should be

activated and installed at the same time the air filter is installed.

1.

Place the indicator face-down on a firm, flat surface.

2.

Apply pressure to the bubble on the back of the indicator,

until the bubble pops to activate the indicator.

3.

Lift open the vented air filter door. On some models, there are

notches behind the door.

4. On models with notches:

Slide the indicator down into the notches, facing outward.

NOTE:

The indicator will not easily slide into the notches

if the rear bubble has not been popped.

Close the air filter door, and check that the indicator is

visible through the rectangular hole in the door.

On models without notches:

Store the indicator in a visible place you will easily

remember - either inside the refrigerator, or elsewhere in

your kitchen or home.

A. Refrigerator water tubing
B. Nut (provided)

C. Bulb
D. Coupling (purchased)

E. Ferrule (purchased)

F. Nut (purchased)

G. Household water line

A

B

C

D

E

F

G

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death,
fire, or electrical shock.

WARNING

MONTHS

REPLA

CE

This manual is related to the following products: