Using the controls – 2 speed combo models, Select water level, Select cycle and water temperature – Maytag PAVT915AWW User Manual

Page 4: Step 1 step 2, Regular cycle, Permanent press fabrics cycle, Delicates cycle

Cycles, options, lights

What can & cannot be
washed

operating tips

dishwasher use

Controls at a glance

Dryer Exhaust tips

Safety

Care & Cleaning

Service & Warranty

Surface Cooking

troubleshooting

Oven Cooking

Storing the washer

Installation

Special Features

Notes

Using the Controls – 2 Speed Combo Models

STEP

WATER LEVEL SETTING

LOAD SIZE

Mini

1/4 Full

Med

1/4 – 1/2

Large

1/2 – 3/4

Oversize

3/4 – Full

Note:

Items must circulate freely for best results.

Note:

In wash water temperatures below 60

detergents do not dissolve well or clean well. Care
labels define cold water as up to 85

Select Water Level

Determine the selected setting based on clothes load
size. Selection should provide sufficient water to permit
clothes to circulate freely during agitation.

It may become necessary, due to bulky fabrics, to
adjust the water level after agitation begins. To adjust
the water level, turn the control to Reset and then
back to the desired setting.

Select Cycle and Water
Temperature

To select a cycle and water temperature, push the
control dial in (off position) and turn it to the right
(clockwise) until the pointer is at the number of
minutes and water temperature needed for the wash
load in the Regular, Permanent Press or Delicates
cycles. All rinses are cold water.

Regular Cycle

Used to wash Cottons and heavily soiled items.

Permanent Press Fabrics Cycle

Used to minimize wrinkles with a cool-down spray
rinse following the wash.

Delicates Cycle

Used for items requireing delicate wash action. The
washer will fill, them agitate and soak alternately.