Maytag WED4800BQ Dimension Guide - Manual

Electric Dryer
PRODUCT MODEL NUMBERS
W10562358A
02/2015
WED4800B, WED4810B, WED4850B, WED4870B, WED5000D,
WED4810E, WED4815E, WED4915E, WED4975E
29"
(737 mm)
43 3 /
8
"
(1102 mm)
1 /
2
"
(13 mm)
29"
(737 mm)
1 1 /
2
"
(38 mm)
43 3 /
8
"
(1102 mm)
Dryer Dimensions
NOTE: Leveling legs should be 1/2" (13 mm) (to match height
of 3.6 cu. ft. capacity washer) or 1½" (38 mm) (to match height
of 3.8 cu. ft. capacity washer).
22 3 /
4
"
(578 mm)
27 3 /
4
"
(705 mm)
Wide opening side-swing door Wide opening hamper door
*Most installations require a minimum 5½" (140 mm) clearance
behind the dryer for the exhaust vent with elbow. See “Venting
Requirements.”
Minimum Required Spacing
A B C
18"*
(457 mm)
1"
(25 mm)
29"
(737 mm)
1"
(25 mm)
1"*
(25 mm)
14" max.*
(356 mm)
27 ¾"
(705 mm)
48 in.
(310 cm )
2 *
2
3"*
(76 mm)
3"*
(76 mm)
24 in.
(155 cm )
2 *
2
A. Recessed area
B. Side view - closet or confined area
C. Closet door with vents
Minimum spacing for recessed area or closet
installation
The dimensions shown following are for the minimum spacing
allowed.
■ Additional spacing should be considered for ease of
installation and servicing.
■ Additional clearances might be required for wall, door, and
floor moldings.
■ Additional spacing of 1" (25 mm) on all sides of the dryer
is recommended to reduce noise transfer.
■ For closet installation, with a door, minimum ventilation
openings in the top and bottom of the door are required.
Louvered doors with equivalent ventilation openings
are acceptable.
■ Companion appliance spacing should also be considered.
*Additional spacing recommended
27 3 /
4
"
(705 mm)
13 3 /
4
"
(349 mm)