After use / storage – Maytag MLI7000AAW User Manual

Page 10

AFTER USE / STORAGE

Setting indicator

1. Press the steam button, so that it

returns to the “Dry” position.

2. Turn the temperature control dial to

“OFF”.

3. Remove the tank and drain

any remaining water After
draining the water, reinstall
the tank onto the iron.

4. Remove the electrical plug

from the electrical outlet.

• Grasp the electrical cord

by the plug when
unplugging it.

5. Retract the electrical cord.

• To retract the electrical cord, pull it out

slightly, then release it.

• If the cord stops before retracting

completely, pull out the cord slightly,
straighten out any twisted parts, then
slowly release it again.

6. Place the case back over the iron.

• Be sure that both case latches are

closed securely prior to storage.

• Please be aware that the case will

only fit correctly in one direction. If the
case is placed sideways over the iron,
it may become deformed due to the
iron’s heat.

Keep hold of the

electrical plug.