Step 6 step 5, Select cycle, Pull control dial out to start – Maytag LAT3500AAE User Manual
Page 5: Select wash/spin speed, Step 4

Step 6
Step 5
4
Select Cycle
To select a cycle, push the control dial IN and turn it to
the right (clockwise) until the pointer is at the number
of minutes desired for the wash load.
Regular/Delicates Cycles
Regular/Delicates cycles share the same portion of the
control dial. For regular fabrics, select the cycle and
turn the Wash/Spin Speed dial to Regular/Fast. For
delicate loads select Delicate/Slow. For maximum
cleaning set the dial at 16.
Wrinkle Free Fabrics Cycle
This cycle provides up to 10 minutes of agitation.
Depending on the load, select either the Regular/Fast
or Regular/Slow wash/spin speed.
Hand Washables
Hand Washable provides approximately 10 minutes of
agitation and soaking to help remove stains.
Pull Control Dial Out to Start
You may stop the washer at any time by simply push-
ing the control dial IN. Therefore it is possible to obtain
a non-agitated soak or to shorten, skip or repeat any
part of a cycle. The control dial must be pushed IN (off
position) when you change the setting.
See Laundering Tips for proper washing procedures,
stain removal, and special laundering situations.
Sturdy fabrics needing
maximum water extraction.
Sturdy fabrics needing a
slower spin speed because
of wrinkling.
Delicate fabrics needing
slower spin speed because
of clothing construction.
Regular/Fast
Regular/Slow
Delicate/Slow
WASH/SPIN SPEEDS
LOAD TYPE
Select Wash/Spin Speed
Your washer has selectable wash and spin speed
combinations.
Step 4
Note: Do not attempt to turn the control dial coun-
terclockwise. Damage to the timer will result.
Soak Only
There will be a brief period of agitation followed by a
soak. Soaking should be no longer than 30 minutes. The
control dial must be advanced manually to a spin or a
wash setting.