Using the controls – three-speed models, Select wash/rinse temperature, Select water level – Maytag HAV2460AWW User Manual

Page 8: Select extra rinse, Step 1 step 2 step 3

Select Wash/Rinse Temperature

Your washer gives you a choice of hot, warm or cold
water for washing and cold or warm water for rinsing.
Use the chart below as a guide.

Using the Controls – Three-Speed Models

Select Water Level

Determine the selected setting based on clothes load
size. Selection should provide sufficient water to permit
clothes to circulate freely during agitation.

It may become necessary, due to bulky fabrics, to
adjust the water level after agitation begins. To adjust
the water level, turn the control to reset and then back
to the desired setting.

Select Extra Rinse

(if desired)

When the knob is in the “On” position, an additional
rinse at the end of the Regular, Wrinkle Free Fabrics
and Delicates cycles is provided to more completely
remove laundry additives, suds, perfumes, etc.

STEP

WATER LEVEL SETTING

LOAD SIZE

Small

1/4 Full

Medium

1/4 – 1/2 Full

Large

1/2 – 3/4 Full

Oversize

3/4 – Full

Note

• Items must circulate freely for best results.

Hot/Cold

White and heavily soiled, color-fast
items

Warm/Warm

Delicate items

Warm/Cold

Moderately soiled, colored items;
most wrinkle-free items

Cold/Cold

Brightly colored, lightly soiled
items; washable woolens

WASH/RINSE

LOAD TYPE

TEMPS

Note

• In wash water temperatures below 65

detergents do not dissolve well or clean well. Care
labels define cold water as up to 85

This manual is related to the following products:

HAV2360AWW