Mathey Dearman 1SA Saddle Machine - Manual (Page 5)

5
The correct Spacer length (between outside diameter of pipe and inside diameter of saddle) is 2-3/16”
(55.5mm).
Figure 1: Spacer Configuration for 6”, 8”, 10”, & 12” pipe
Table 1 – Spacer Bolt Part Identification
Figure 2: Step Spacers
Table 2 – Step Spacer Part Identification
Bore (inside diameter) of 1SA
Machine Saddle 8-7/8” (225.4mm)
Subtract actual OD of pipe 4-1/2" (219mm)
Difference 4-3/8” (111.1mm)
Divide Difference by two (2) 4-3/8” ÷ 2 = 2- 3/16” (55.6mm
PART DESCRIPTION Part # QUANTITY REQUIRED
1SA Step Spacer 03-0110-1SA 4
8” Spacer Bolt (comes with 1SA Step Spacer) 03-0110-1SAM 4
2Sa Step Spacer Kit 02-0110-1SA Kit 1
ITEM # PART DESCRIPTION PART # QUANTITY REQUIRED
1 Spacer for 3” / 76.2mm pipe 03-0110-034 4
2 Spacer for 4” / 101.6mm pipe 03-0110-003 4
3 Spacer for 6” / 152.4mm pipe 03-0110-002 4
4 Spacer for 8” / 203.2mm pipe 03-0110-001 4
5 Spacer Bolt Kit (includes all of the above) 03-01SA-KIT 1