Dodge 2006 Sprinter Cargo - Manual (Page 294)

294 MAINTAINING YOUR VEHICLE
Interior Lighting with Reading Lamp
1. Use a screwdriver on the catch spring to press in
and remove the bulb housing.
2. Replace the bulb, K – 12V 10W.
3. Install the lamp housing.
Interior Lighting with Interior Sensor Protection
1. Use a screwdriver on the catch spring, remove the
bulb housing.
2. Turn the bulb holder with the bulb in the direction
of the arrow and remove it.
3. Replace the bulb holder and bulb, K – 12V 6W
4. Install the lamp housing.