Marantz AS4250 - Manual (Page 6)

Installing the Plasma Display on the Stand
* When installing in the vertical
position
3. Insert the plasma display on the
stand and fasten it.
Use four of the included M6 display mounting screws to
fasten the monitor to the stand.
Tighten the screws immediately after placing the display on the stand.
If not, the display could tip over, resulting in injury.
CAUTION:
2. Mount the cores on the feet.
* Fasten using the 4 included core mounting screws (M6
hexagon socket head cap screws).
Tighten the screws securely.
If not, the monitor could tip over, resulting in injury.
1. Assembling the stand
1. Turn the bar upside down and place it on the feet, lining
it up with the screw holes in the feet.
Install with the arrow facing the front.
2. Fasten the bar to the feet using the four included stand
assembly screws (M4).
CAUTION:
FR ON T
FR ON T
FRONT
Mounting a 50-inch plasma display on the stand
50型バー取付け位置 Bar installation position for 50”