Delta 1725-LHP - Manual

COMPLIES WITH:
•
ASME A112.18.1-2000
• ASSE 1016-1996
• CSA B125-98
• Showerhead GSA A-A-240
Indicates ADA compliance to
ICC/ANSI A117.1-1998
• ASSE Seal Authorized
• CSA Certified
• IAPMO Listed
BATH MIXING
VALVES
■ Victorian™ Collection
■ Shower Only (1725)
■ Tub/Shower (1755)
■ Single Handle
■ Monitor ® with Scald-Guard ® Valve
■ Pressure Balance
■ Volume Controlled with Less
Handle Accent
■ Temperature Controlled with Dial
■ Decor Trim Plate
■ Universal Fittings
Submitted Model No.: _____________________________________________
Specific Features: ________________________________________________
STANDARD SPECIFICATIONS:
•
Requires 1 1 ⁄
2
" (38 mm) wall cavity.
• Back-to-back installation capability.
• Solid brass fabricated body .
• Monitor ® with Scald-Guard ® valve.
Maintains a balanced pressure of hot
and cold water even when a valve is
turned on or off elsewhere in the system.
• Lever volume control handle; temperature
adjustment dial.
• Field adjustable to limit dial rotation
into hot water zone.
• Maximum dial rotation adjustable
between 90° and 180°.
• Red and Blue graphics indicate
hot/cold temperature adjustment.
1725-LHP 1755-LHP
0
1
2
3
4
5
0 10 20 30 40 50 60 70 80 90
Pressure (PSI)
Flow (U.S. Gallons Per Minute)
6
0 69 138 207 276 345 414 483 552 621
0
3.8
7.6
11.4
15.1
18.9
22.7
Pressure (kPa)
Flow (Liters Per Minute)
Showerhead
Tub Filler
1 3/4” (44 mm)
with trim ring
2" (50.8 mm)
without trim ring
C/L Supply
Lines
If recessed, the escutcheon
screws may need to be shortened.
Plus or minus 1/2" (12.7 mm) - B -
Cover must be removed prior
to installation of trim.
Inlets
8" (203 mm) Min.-
18" (457 mm) Max.
7 3/4"
(197 mm)
A
Dimensions A
I.P.S. or C.W.T. 2 1/2 " (63.5 mm)
I.P.S. or C.W.T. w/stops 5 1/2 " (139.7 mm)
®
®
U P
C
Delta reserves the right (1) to make changes in specifications and materials, and (2) to change or discontinue models, both without notice or obligation. Dimensions are for reference only.
7”
(178 mm)