Marantz PM8005 - Manual (Page 26)

26
Appendix Tips Settings Connections Contents
Front panel Rear panel Index Remote
Playback
Turning off the sound temporarily
1
Press MUTE .
The mute indicator lights.
%
• Muting can be cancelled by pressing MUTE
again.
Adjusting the tone
1 Turn the BASS, MID, TREBLE and BALANCE control
knobs to adjust the tone.
NOTE
• When the source direct mode is on, the tone cannot be adjusted because the audio
signal does not pass through the tone adjustment circuit (BASS, MID, TREBLE,
BALANCE). Check that the source direct indicator is off.
Selecting the speakers for audio output
1 Press SPEAKERS A/B to select the speaker system to be
used for playback.
The indicator of the selected speakers lights.
%
• Press SPEAKERS A/B to turn the speaker audio output off, and the speaker
switching indicator turns off.
Selecting the input source
1 Press the input source select button to be played back.
The indicator of the selected input source lights.
%
• You can also select the input source by turning INPUT SELECTOR on the main unit.
Adjusting the volume
1 Use VOLUME df to adjust the volume.
%
• You can also adjust the volume by turning VOLUME on the main unit.